How to clean burnt pots

To make your favorite recipes and get the best flavor, the state of kitchen utensils, such as pots, plays an important role. In the case of pots, keeping them in good condition allows them to perfectly fulfill their function and not affect the production in terms of the final result. Therefore, it is essential to clean them if they burn due to carelessness or any other reason.

How to clean burnt pots with vinegar and baking soda

Vinegar is an excellent cleaning product due to its acidity which, when mixed with baking soda, becomes even more effective. Thus, you can clean your burnt pots with this combination in a simple way. Learn how to clean burnt pots with vinegar and baking soda by following these simple steps:

  1. Fill the burned pot with water, covering the entire bottom.
  2. Add vinegar and turn on the fire so that it begins to boil.
  3. When the water and vinegar boil, remove the pot from the heat.
  4. Also, to clean burnt pots on the inside when there is a lot of burned and stuck part, you need to add baking soda.
  5. You will see that there is a reaction and bubbles come out. It is normal and you can wash the container by rubbing the inside with this mixture of water, vinegar and bicarbonate and a scouring pad or sponge. Use a scouring pad if the pot does not have a nonstick coating, but if it does, then use a soft sponge to avoid damaging it.
  6. In case some stains remain, apply a paste made with bicarbonate and a few drops of vinegar diluted in water, that is, prepare the same mixture as before but much thicker (more bicarbonate than liquids). Let it act for a few seconds and then use the scourer, brush or sponge to rub the paste over the burned area and remove all the remains after rinsing the pot with clean water.

We recommend you read these other posts on How to clean with baking soda and vinegar and How to clean with white vinegar for more tips and tricks to use these homemade cleaning products.

How To Clean Burnt Pots - How To Clean Burnt Pots With Vinegar And Baking Soda

How to clean burnt pots with baking soda

If you’re wondering how to get burned out of a stainless steel pot, note that baking soda is also helpful in this material. You should mix one tablespoon of baking soda for every 1.5 liters of water in the container. Learn how to clean a pot with baking soda with these instructions:

  1. Light a fire and put the pot of water on top.
  2. When the water boils, add the baking soda, stirring it until it dissolves.
  3. After a few more minutes of boiling, remove the pot from the heat.
  4. Using a spatula (preferably a wooden one), scrape off the burned parts of the inside of the pot.
  5. Once you get the black out of the container, empty it and let it cool.
  6. Finally, wash the pot as you normally do.
  7. If there are black spots that persist, use a baking soda paste to rub in directly. You can make this paste with baking soda and a little water or, if you see that it is very sticky and difficult to remove, we recommend you try the mixture that includes vinegar and we have explained before.

With this method, you will know how to remove the black from burned pots to make them completely clean before using them again, but this product is also useful for cleaning more objects and some areas of the house. Here you can learn about How to clean with baking soda .

How To Clean Burnt Pots - How To Clean Burned Pots With Baking Soda

How to clean a burnt pot with cola

Cola is a homemade resource with which you can clean burnt pots on the outside and inside easily thanks to its composition with acids and gas. At OneHOWTO we help you learn how to clean a burnt pot with cola by following these steps:

  1. Open and pour a bottle of cola into the container.
  2. Build a fire to bring the soda to a boil.
  3. Remove the pot when the soda has started to boil.
  4. Scratch the surface with a scouring pad. Thanks to the acidity of the cola, the black spots will disappear quickly.
  5. To clean the burned pot on the outside, you can fill a basin or sink with this soda and use it to soak the pot for about 20 minutes and then clean it using a soft scouring pad or sponge.

How to use lemon to clean burnt pots

Cleaning a burnt pot with lemon is also possible thanks to its citric acid. You just have to follow these simple steps to achieve it:

  1. Cut a lemon in half.
  2. Rub the lemon over the black spots on the pot.
  3. With the help of a scourer, finish rubbing the lemon juice until the pot is clean and regains its shine, because little by little you will see that the burned parts are coming out of the metal surface.
  4. As you see that it remains clean of burned parts, do not forget to wash the pot as you usually do with dish soap or in the dishwasher, so you will remove all traces of dirt and you can use it again without problems.

After having learned how to clean burnt pots with lemon, in this link you can discover more tricks about How to clean with lemon , a very effective homemade product for cleaning at home.

How to use salt to clean burnt pots

You can also clean a burnt pot with salt . It is a resource as simple as it is economical, since salt is in all kitchens and you can use it at any time. Use salt correctly to exfoliate and clean a burned pot by following these tips:

  1. We recommend that you remove as much dirt as possible from the inside of the pot, that is, do a first basic cleaning with water and a scouring pad, so the product you use later, such as salt, will act more easily.
  2. Pour some warm water into the pot and add 2 tablespoons of salt.
  3. Rub the pot with a soft sponge, insisting on the burned areas.
  4. If you can’t get rid of all the burns, boil more salted water in the pot.
  5. Once it has cooled down, rub again with the sponge and you will finish with the stains.
How To Clean Burnt Pots - How To Use Salt To Clean Burned Pots

How to clean burnt pots with bleach

Despite the unpleasant smell it leaves behind, cleaning a burned pot with bleach is another effective method:

  1. Fill the pot with room temperature or cold water if you need to remove the burned from the inside, or fill the sink or a basin with water if you need to clean the black from the outside of the pot.
  2. Add a squirt of bleach.
  3. Wait 3 or 5 minutes for the mixture to work in the pot, removing the black dirt.
  4. Rub the container with a soft scouring pad to remove the burned remains.
  5. Lather the entire pot with the usual soap and then rinse it well to finish removing all the dirt, bleach and soap and you will have the pot completely clean.

More from author

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!