How to clean the cooker hood

The kitchen is one of the main rooms of the home, since it is where you will keep a large part of the food, you will cook and even eat on some occasions. Therefore, it is essential to keep it clean for hygiene reasons. In this sense, it will be especially important that the extractor hood is clean as it is one of the most widely used appliances and, therefore, one of the most dirty. On many occasions you will need the extractor hood to work at full capacity while you cook, since it is the only way to keep the environment free of odors and fumes. It also absorbs grease in smoke and fumes when cooking, so it easily picks up a lot of dirt.

How to clean the inside of the cooker hood

Knowing how to clean the grease cooker hood inside is very important because it is a delicate task. It is difficult to access all the parts that make up the appliance, but there are methods that allow cleaning the inside without having to reach the extraction tube through the end area.

Degreaser

Among the products to clean the extractor hood inside are specific degreasing products to clean stainless steel or similar materials from the kitchen. Apply it correctly to clean a fume hood by following these steps:

  1. Spray the inside with a degreaser.
  2. Wait a few minutes for it to take effect (you can be guided by the product label where it will put the necessary time in your case) and, when the dirt has been softened by the used product, take a cloth to clean the dirt.
  3. Repeat the process several times until you see the inside of the cooker hood completely clean.

Baking soda

Using baking soda is another trick to cleaning the cooker hood. This method requires more time and dedication, but it is also effective. Learn how to clean the cooker hood with baking soda by following this step by step:

  1. Put two pots full of baking soda water on the hob or stove.
  2. Light the fires so that the pots begin to boil. At the same time, turn on the bell.
  3. The extractor hood will absorb the steam released by the pots, slowly dissolving the accumulated fat inside.
  4. Keep the pots on the plate for at least an hour for the method to be effective. If there is very little water left, you can add more water and bicarbonate, as you will have to make sure that it does not run out of water so that the pot does not burn.
  5. Protect the plate with absorbent paper so that it absorbs the fat that can fall dissolved from the hood. If there was not much accumulated, nothing may fall, but if there was, it will fall and as soon as you see that it begins to fall, in fact, you can remove the pots and turn off the fires and clean the hood with a cloth inside.
  6. If you see any area where it is difficult to remove accumulated dirt, you can make a mixture of water and bicarbonate in a bowl, with more bicarbonate than water to make a somewhat thick mixture, and with a brush, a sponge or a cloth, Take a little of this paste and rub it in the area inside the hood where you see more dirt. You will see how little by little all the fat and other residues will come out.
  7. To finish, you can wipe with a damp cloth with just water or white vinegar to remove all traces of dirt and leave the area spotless.
How to clean the cooker hood - How to clean the cooker hood inside

How to clean the outside of the stainless steel cooker hood

To clean the exterior of the stainless steel cooker hood , follow these guidelines:

  1. Unplug or turn off the cooker hood so there are no short circuits or cramps while you are cleaning it.
  2. Cleaning will depend on the material from which the hood was made. In the case of stainless steel, it is convenient that you use a specific product to clean stainless steel.
  3. Try to clean with a cloth in one direction to avoid scratches or marks, thus removing all the shine.
  4. To clean the hood control and its elements (buttons and display, if you have one), avoid using liquids whose humidity can damage them. A dry or slightly damp cloth will be enough to leave them spotless.

In this other post we tell you more details about How to clean stained stainless steel .

How to clean the cooker hood - How to clean the stainless steel cooker hood outside

How to clean the cooker hood filters

Cleaning the filters of the kitchen hood is a task that requires the prior disassembly of the filters themselves. Consult the appliance’s user manual for how to disassemble them, as the system may change depending on the manufacturer and model. When you have removed the filters, the best way to clean them is with the dishwasher, programming a wash cycle will be enough. If you do not have a dishwasher, use a basin, or any other container filled with hot water, and follow this process to clean very dirty hood filters by hand:

  1. Add a little degreaser and let the filters soak for several minutes.
  2. When the grease is softened by the effect of the degreaser, use a cloth to wipe it through the filters and remove the dirt.
  3. You can also use a soft scouring pad or brush, but avoid abrasive products, such as aluminum scourers, because you will end up damaging the filters.
  4. Remember that, after cleaning the filters, you must do the same with the outside and inside of the hood before mounting them.

If your extractor hood is recirculating, you will not have to clean the filters because this system absorbs the air, filters it and returns it to the kitchen clean. Its filters are carbon and what you should do is change them when indicated by the manufacturer.

If you want to know more tips about this cleaning, we encourage you to read this other post in which we detail How to clean the filter of the kitchen hood .

How to clean the cooker hood - How to clean the cooker hood filters

How often you have to clean the cooker hood

In addition to helping you discover how to clean the cooker hood, at OneHOWTO we recommend that you clean the cooker hood after cooking . Thus, you will carry out daily maintenance and save yourself great efforts when you want to do a deep cleaning.

On deep cleaning the kitchen extractor , do one every 2 months . If you have done the daily maintenance, it will be much easier. To do this thorough cleaning, you will need to disassemble the filters and leave both the inside and outside flawless before mounting them again.

More from author

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!