How to remove glue from wood

Wood is one of the most delicate materials in the home, as it is susceptible to stains, humidity and contact with difficult-to-remove substances, such as glue. Stickers or stickers can become a headache if you don’t know how to properly remove them from the wood without damaging it and without leaving traces.

Remove glue from wood with heat

Whether it’s glue, white glue , or strong glue , heat can be a very useful method of softening it and making it easier to remove from wood. To use it, you must have the following materials:

  • Hair dryer.
  • Dry cotton cloth or rag.
  • Plastic spatula.
  • Olive oil.

Once you have all the materials, you just have to follow these steps:

  1. Wipe the surface with a dry cloth to remove any dust.
  2. Set the hair dryer on a low heat setting.
  3. Turn on the hair dryer and apply the heat on the surface with glue at a distance of about 10 cm.
  4. Let the heat act for about 20 seconds.
  5. Begin to remove the glue with the spatula.
  6. Reapply heat until the glue is completely removed.
  7. If there are traces of glue on the surface, apply heat again for a longer time to soften it more.
  8. Wipe the surface with a dry cloth to remove any glue that has remained on the surface.
How to remove glue from wood - Remove glue from wood with heat

How to peel stickers from wood

It is common for new wooden furniture to come with brand stickers or for children to fill it with stickers or decals over time. When we finally want to remove them, it can be very difficult or laborious to achieve. So that you know how to remove a sticker from the wood or remove the adhesive that your arms leave without tiring you, follow these steps:

  1. Use any type of oil, either liquid or spray, to remove the stickers from the wood.
  2. Place or spray the sticker with the oil and let it act for about 4 minutes.
  3. With your fingertips you can peel off the sticker. You can also help yourself by using a plastic spatula.
  4. Clean the surface and see the result. If you still have glue residue on the surface, put a few drops of oil on it, let it work and remove it with your finger.
  5. Clean the surface with soap and water.
  6. Dry the surface with a dry cloth.
  7. Apply glycerin to the surface to make it shine again.

Another way to remove the stickers is by applying steam. To do this, use an iron to remove stickers from the wood:

  1. Place a damp cloth on the surface with the sticker.
  2. Iron the damp cloth to steam. This steam will cause the sticker to start to peel off.
  3. Finally, wipe the surface with a dry cloth.

Use acetone for strong glues

Cyanoacrylate, a substance contained in strong adhesives known as Superglue or Loctite, can be very difficult to remove. Acetone is very helpful in removing this type of glue, but be aware that it can damage painted or varnished surfaces. If you are not sure if it is harmful to your furniture, apply acetone to a small, non-visible part of the wood and observe its reaction.

If you know how to remove strong glue from wood , follow these steps:

  1. Clean the surface very well with a dry cloth so that the glue stain is visible. This way you avoid applying the product in other areas and risking damaging the wood.
  2. Put a few drops of acetone on the glue stain and wait for it to work.
  3. With a plastic spatula, try to remove the stain with gentle movements so as not to damage the wood.
  4. Dry very well with a cloth soaked in water and wait for it to dry. Then wipe with a dry cloth.
  5. Apply a little glycerin to give the wood a natural shine.

If you have painted or varnished wood, you can use heat to remove the strong glue, but you will need a little more patience, as it may take more time.

Remove glue stains on wood with sandpaper

Removing glue stains can be a headache, so many carpenters and restorers choose to use sandpaper to completely remove traces.

In this case, we recommend using sandpaper only to remove strong glue that you cannot remove by other means without damaging the wood. Follow these steps:

  1. Use an extra fine grit sandpaper of 400, 500 or 600, recommended for polishing wood and other rustic surfaces with a matte finish.
  2. Take a piece of sandpaper a little larger than the surface with the glue, and start sanding very gently until you manage to flatten the adhered glue. Make sure you don’t sand any wood that isn’t affected by the glue.
  3. Use a 1000 or 1200 sandpaper and continue sanding any excess glue. You must be very careful not to sand the wood, as it would remove the color or varnish.
  4. Use a cloth to remove any loose glue and dust on the wood.
  5. If you accidentally removed paint or varnish from the wood, you should put a fresh coat of paint over the sanded part.
  6. Apply a little varnish to protect the painted area and make the color even with the rest.

Remove the glue from the wood with vinegar

If you want to use less powerful and more homemade products, vinegar is an excellent option to clean the wood and leave it as new . To know how to remove glue from wood with vinegar, just pay attention to the following steps:

  1. Take a cotton cloth and wet it with vinegar, squeeze it so that it does not get soggy.
  2. Rub the stained area with the glue in a circular motion, back and forth.
  3. Let dry and repeat the procedure until the glue is removed and the stain is removed.
  4. Clean the surface with a dry cloth.
  5. Apply a product to restore the shine to the wood or use glycerin as an alternative.
How to remove glue from wood - Remove glue from wood with vinegar

How to remove paste from wood with lemon and salt

If you prefer to use more natural methods, you can make a preparation with lemon and salt that will be very useful to remove the glue left by the paste . These are the steps you will have to follow:

  1. Take a green lemon and cut it in half.
  2. Gently squeeze the lemon onto the spilled glue on the wood. It is not necessary to use all the lemon juice if the stain is not very large, a few drops will suffice.
  3. Be a little patient and wait about 10 minutes for the lemon to penetrate the glue and start to soften it.
  4. Put some fine salt on the affected area and wait another 5 minutes. After this time the glue will have softened.
  5. Remove the glue with a plastic putty knife so you don’t scratch the wood or remove the paint. You can also put a few drops of olive oil to take care of the wood.
  6. Wipe it with a few drops of lemon to finish cleaning the surface.
  7. Wait for the wood to dry completely and wipe it with a cloth or cotton with glycerin to give it a natural shine.

More from author

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!